Minneapolis Roofing Company ▸ Projects ▸ Seamless White Aluminum Gutters on Eaken Ave NE in Buffalo, MN

Seamless White Aluminum Gutters on Eaken Ave NE in Buffalo, MN

location pin
Eaken Ave NE Buffalo, MN 55313

What made the job smoother was the roof we’d done the year before. Because The Kingdom Builders handled the roof replacement, the kick-out flashings and the gutter apron were already in place and done correctly. That matters more than most people realize. When those details are right from the start, the gutters sit where they should, the water comes off the roof the way it’s supposed to, and we don’t spend the first hour of the job fixing someone else’s shortcuts. We could go straight to layout and installation.

Trades: ,

See other projects in

White two-story house with front porch in Buffalo, Minnesota after installation of classic white seamless gutters and Leaf Blaster Pro gutter covers.

We pulled up to the house on Eaken Ave NE in Buffalo and the white siding made the gutter decision easy before we even grabbed a tape measure. Clean, classic lines on a two-story home with a wide porch and black shutters. The kind of place where the gutters need to disappear into the look instead of fighting it. White on white just works.

This was a bigger system—almost 300 feet of seamless gutter. Longer runs mean more miters, more places where the pitch has to stay consistent, and more decisions about how the water is going to move once it hits the trough. We spent extra time walking the house and figuring out the high-volume spots. Some sections of the roof dump a lot of water in a short stretch, especially during those heavy spring and summer rains we get around Buffalo. In those areas we stepped up to the high-flow Leaf Blaster Pro covers so the water could keep moving even when leaves and debris were trying to stack up. Everywhere else we ran the standard Leaf Blaster Pros. The combination keeps the system clear without turning the gutters into a maintenance project every fall.

We used the heavy-duty 0.032 aluminum for the entire run, it is our standard thickness. The thinner material you sometimes see is fine in milder climates, but it doesn’t hold up as well here. Minnesota freeze-thaw cycles, ice dams, and the occasional limb that comes down in a storm all put stress on the gutters. The thicker aluminum resists denting and warping better, and it gives the seams and miters something solid to lock into. Once the covers go on, the whole system feels rigid and finished instead of light and temporary.

The porches and the corners took the most time. Miters have to be cut tight so water doesn’t sit in the joint, and the downspout placement has to match how the water actually wants to leave the roof. You can measure everything twice and still find one or two places where a small change in pitch or an extra downspout keeps water from ever reaching the foundation or the landscaping.

By the end of the day the white gutters blended into the siding the way the homeowners wanted, the Leaf Blaster Pros were locked in, and the high-flow sections were handling the heavier runoff without any visible gaps or weak points. The system is quiet when it rains, the water is directed away from the house, and the leaf load that normally fills open gutters on a property like this now slides off the covers instead of packing inside. For a home this size in Buffalo, that combination of proper flashings from the previous roof, thick aluminum, and the right gutter covers in the right places should keep the water where it belongs for a long time.

If you’re in Buffalo or the surrounding area and your gutters are overflowing, clogging every fall, or just looking worn out against a white or light-colored house, the same approach works. We measure the full perimeter, match the color of the home, and plan the covers around the actual water volume instead of treating every section the same. The roof details matter too—if the flashings and apron aren’t right, we address that before the gutters go up. Most jobs don’t need a full roof replacement to get those pieces correct, but when they are already done, the gutter installation is faster and the finished system performs better from day one.

If your place needs the same kind of system—or if you’re tired of dealing with clogged gutters every fall—reach out and we’ll take a look. We handle the measurement, the material, the covers, and the cleanup, and we make sure the finished gutters work with the roof you already have. Buffalo sees plenty of rain and leaves; the right gutter setup keeps both from becoming a problem.

Get started with The Kingdom Builders today

The Kingdom Builders is a 5-star rated, neighborhood-trusted exteriors company serving the Minneapolis-St. Paul metro area. Contact us for a free quote on roofing services, gutter installation, windows, or siding projects you may need on your home.